Here you will find help to the most frequently asked questions (FAQ)as well as video tutorials and instructions for use

Placing and attaching the electrodes

The device needs to be off. Take the supportfilm with both electrodepads from the transport bag. Plug in the electrodeplugs from the other end of the cable in the sockets on the electrodes. The electrodes need to stay on the supportfilm for protection.

Before attaching the electrodes you need to check if the device is still off. Also take off the protection film from the electrodes. Keep the film, you will need it afterwards.

Place the electrodes in the regions where you want to have the hair removed. Press the electrodes firmly on the cleaned and dry skin. If they are not correctly attached, no flow of power can occur and the device would turn off immediatly.

Before taking off or applying the electrodes, make sure that the device is turned off.

Was this article helpful?
0 out of 0 found this helpful
Have more questions? Submit a request


Powered by Zendesk