Here you will find help to the most frequently asked questions (FAQ)as well as video tutorials and instructions for use
en-us
Follow

Setting Time, Date and alarms On My Blood Pressure Monitor

  1. Before using the unit, you need to put the LOCK-switch to position "ON" (green). In "OFF" (red) - position the Bluetooth function is deactivated and all buttons are locked.
  2. Press and hold the SET / SNOOZE - button for at least 3 seconds. Press M-button to adjust the actual month. Press the SET / SNOOZE - button to confirm the setting.
  3. Proceed accordingly for the input of day, year, hour and minute (as described before).
  4. On completion of the date and time setting, "Ok" appears on the display.  
  5. Now the setting for the two alarms follows. Adjust the hours and minutes of both alarm times in the same way as described before with the help of the M-button to adjust and the SET / SNOOZE - button to confirm the setting.
  6. On completion of the date and time setting, "Ok" appears on the display.
Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request

Comments

Powered by Zendesk